OPTIMA is Expanding its Production Capacities

OPTIMA is Expanding its Production Capacities

OPTIMA Packaging Group GmbH (Germany) - Press Release: State-of-the-art assembly areas for pharmaceutical filling and freeze-drying systems are being built in Mornshausen (Marburg district) and in Schwaebisch Hall.

The Optima Group is building another CSPE Center at its headquarters in Schwaebisch Hall, to be used for the assembly and comprehensive commissioning of pharmaceutical filling lines. This will expand the production area by around 46,000 square feet (4,300 square meters) and also provide new office space. At Optima Pharma's site in Gladenbach-Mornshausen (Hesse, Germany), the existing assembly hall for freeze-drying systems is being expanded by 50 percent. The investment is due to the high volume of orders received and ongoing developments in the Optima Group’s Pharma Division.

The Optima Group is experiencing high demand for filling and packaging solutions. This is particularly true of the Pharma Division. There was a short-term increase in the already high order backlog caused by the COVID-19 pandemic. In light of this, production capacities are being expanded at the Schwaebisch Hall and Gladenbach-Mornshausen (Marburg-Biedenkopf County, Hesse) sites.

Fast process flows and short time-to-market:

Optima Pharma opened its first CSPE (Comprehensive Scientific Process Engineering) Center at its headquarters in Schwaebisch Hall, Germany, in June, 2019. Ever since, the CSPE Center has been fully utilized, so the new building has been designed to be 25 percent larger, with an almost identical design. Completion is planned for late 2021. CSPE expedites processes from system design to production start. One part of this is integrated (complete) Factory Acceptance Tests of entire lines (iFATs). The new building covers a total area of around 75,000 square feet (7,000 square meters) and has state-of-the-art equipment, enabling joint Factory Acceptance Tests to be carried out on the filling and closing systems and isolators under realistic production conditions. In the approximately 46,000-square-foot (4,300-square-meter) assembly area, the emerging pharmaceutical lines will be supplied with process heating and cooling as well as demineralized water and compressed air via supply lines during commissioning, cycle development and integrated FAT (iFAT). CSPE Center testing ensures that both the subsequent installation and the Site Acceptance Test (SAT) at the customer's site proceed much faster. For Optima's customers, this shortens the time from product development to market launch by several months. The building will be equipped with a separate logistics area. The employees will also enjoy optimal working conditions in the spaciously designed three-floor office building.

The CSPE approach takes effect: CSPE 2.0 is in the wings:

The successful concept will therefore be expanded further. "Integration levels are set to become even greater in future, as part of CSPE 2.0. Work that in the past typically took place on the customer's site will have already been carried out to an even greater extent in one of our CSPE Centers," says Gerhard Breu, Chairman of the Optima Pharma Division. Another customer request concerns GMP-compliant cycle development, which can be handled entirely by Optima Pharma in the future. "This again significantly increases the level of integration, which, in turn, shortens the commissioning phase at the customer's site even further," Breu explains.

Hall extension in Gladenbach-Mornshausen completed in record time:

An expansion of capacity was also needed at the Optima Pharma site in Gladenbach-Mornshausen. The freeze-drying systems manufactured there are used in many turnkey projects, together with filling and closing lines from Schwaebisch Hall or as a stand-alone solution. The existing multi-story assembly hall with approximately 27,000 square feet (2,500 square meters) of assembly space is being expanded by around 11,000 square feet (1,000 square meters). "This investment will enable us to further increase our production and thus create the best conditions for further growth at the Gladenbach-Mornshausen site," explains Stephan Reuter, the Managing Director. The groundbreaking ceremony took place in October 2020.

 

Picture 1 Caption:

With around 46,000 square feet (4,300 square meters) of production space, Optima's new CSPE Center will provide optimal conditions for processing the large order backlog.

Picture 2 Caption:

Optima Pharma's first CSPE Center (pictured on the right) was in operation by June 2019.

Picture 3 Caption:

In the CSPE Center, a crane system is used to place isolators on top of the filling systems. The assembly hall offers maximum safety and helps speed up process flows.

Picture 4 Caption:

Production capacities have already been expanded in Gladenbach-Mornshausen (Hesse, Germany). Around 11,000 square feet (1,000 square meters) of additional assembly space is available there with immediate effect.

For more information about this article from OPTIMA Packaging Group GmbH click here.

Source link

Other articles from OPTIMA Packaging Group GmbH.

Sponsored Links:
Are you interested to advertise on AutomationInside.com Contact us!
Are you interested on the Weighing Industry? Visit Weighing Review the First and Leading Global Resource for the Weighing Industry where you can find news, case studies, suppliers, marketplace, etc!
Are you interested to include your Link here, visible on all AutomationInside.com articles and marketplace product pages? Contact us

© OPTIMA Packaging Group GmbH / Automation Inside

Share this Article!

Interested? Submit your enquiry using the form below:

Only available for registered users. Sign In to your account or register here.

New Interlock Switches Represent Major Step in Ensuring Machine Safety

Regional Supercenter is Given the Opportunity to Promptly Introduce a Package Redesign by Frain Industries