Morehouse Instrument Company, Inc. (United States) - Press Release: Morehouse portable, lightweight, Budget Load Cell Simulator can be a helpful tool in troubleshooting equipment problems; the load cell simulator can be used to verify meters are reading correctly, span meters, and as a check standard to help control drift associated with many digital meters.

With a low-temperature coefficient, the Morehouse Budget Load Cell Simulator will reduce the misidentification of equipment faults and their respective causes to implement corrective actions more effectively. Several labs using the Morehouse Budget Load Cell Simulator have saved countless hours of unnecessary troubleshooting.

Quickly diagnose meter issues with the Morehouse Model 8 Budget Load Cell Simulator. Load Cell Simulator can diagnose whether there is an issue with the meter. The load cell simulator can be used to verify meters are reading correctly, span setpoints into the meter, and as a check standard to help control drift associated with many digital meters.

Load Cell Simulator:

Morehouse portable, lightweight, Budget Load Cell Simulator can be a helpful tool in troubleshooting equipment problems; the load cell simulator can be used to verify meters are reading correctly, span meters, and as a check standard to help control drift associated with many digital meters.

With a low-temperature coefficient, the Morehouse Budget Load Cell Simulator will reduce the misidentification of equipment faults and their respective causes to implement corrective actions more effectively. Several labs using the Morehouse Budget Load Cell Simulator have saved countless hours of unnecessary troubleshooting.

Our simulator allows the end-user to do the following:

• Perform multiple cross-checks on equipment with eight mV/V settings;
• Help control stability/drift;
• Verify coefficients are correctly entered in Morehouse 4215 plus, C705P meter; both use
  the actual coefficients from the calibration report;
• Verify coefficients for other programs such as Morehouse calibration software;
• Check for linearity issues in any meter;
• Use as a diagnostic tool to rule out the load cell meter, leaving the load cell, cables, or
  adapters as the issue;
• Can be used to calibrate A/D offset and gain setting;
• Standardize and set up a new indicator before system calibration.