ICOP Technology introduces DM&P Vortex86 CPU based PC/104 SBC with EtherCAT support

ICOP Technology introduces DM&P Vortex86 CPU based PC/104 SBC with EtherCAT support
ICOP Technology, Inc. (Taiwan) - ICOP Technology introduces a new rugged PC/104 Single Board Computer (SBC) with 1.0 GHz DM&P Vortex86 DX3 processor and EtherCAT support for ISA bus based industrial control technologies. The new ICOP Technology VDX3-6755 PC/104 SBC with 2GB DDR3 not only delivers native ISA bus support without bridges and full PC/104 compliance but also comprehensive support of the open EtherCAT standard for connected control automation technologies in real-time environments. OEMs benefit from increased return on investment by continued deployment of existing ISA bus based applications for a further seven years.

To adapt field applications in harsh environments, the new ICOP Technology PC/104 SBC it equipped with one CAN 2.0 bus module and two RS-232 interfaces that are fully isolated against overvoltage of up to 2.5kV for both power and signal lines. The RS485 is protected against electro static discharge (ESD) of +/- 15kV. Additionally, it fully supports the extended temperature range from -20°C to + 70°C.

The DM&P Vortex86 DX3 integrated GPU delivers powerful graphics and supports full HD resolution of 1920 x 1080 at 60 Hertz dual display for VGA and 24-bit LVDS as well as optional video capture functionalities. This makes the new PC/104 board also suitable for cost effective vision system designs in pick & place and inspection applications.

For Ethernet and EtherCAT connectivity, the PC/104 VDX3-6755 SBC is equipped with 1x Gigabit LAN based on the RTL8111F PCIe LAN chip, and one processor integrated R6040 10/100Mbps LAN supporting the Acontis EtherCAT Master Stack for real-time Linux and DOS.

The ICOP Technology PC/104 SBC supports a wide range of operating systems – from DOS to Windows CE6.0, CE7.0, Windows 7, WES7, Windows XP Professional, Windows Embedded Standard (XPe), POS Ready (WePOS) and Embedded Linux, X-Linux and Linux right up to QNX (BSP), VxWorks (BSP) and FreeBSD. The ICOP Technology VDX3-6755 CPU board is available now.

For more information about this article from ICOP Technology click here.

Source link

Other articles from ICOP Technology.

Sponsored Links:
Are you interested to advertise on AutomationInside.com Contact us!
Are you interested on the Weighing Industry? Visit Weighing Review the First and Leading Global Resource for the Weighing Industry where you can find news, case studies, suppliers, marketplace, etc!
Are you interested to include your Link here, visible on all AutomationInside.com articles and marketplace product pages? Contact us

© ICOP Technology / Automation Inside

Share this Article!

Interested? Submit your enquiry using the form below:

Only available for registered users. Sign In to your account or register here.

Balluff’s New Transducer BTL with real-time Ethernet interfaces

iC-Haus Single-Chip Encoder for BLDC Motor Montrol up to 200.000RPM